Internal Gear Systems

Latest
Most Viewed
Most Commented
How To Overhaul Shimano 333 FA 3-Speed Hub

I show how to disassemble, clean, lube, and re-assemble a Shimano 333 FA three speed hub. I also show how to install the wheel and adjust the shift cable. You can replace the bearings if they need it. In the video I use a Shimano TL-3S20 Ball Cup Removal Tool. I plan to do another …Read more »

Overhaul Sturmey Archer TCW III 3 Speed Hub w/ Coaster Brake

I show how to disassemble, clean, lube, and re-assemble a Sturmey-Archer (TCW III) 3 speed hub with coaster brake. A complete teardown/rebuild. The bike is a made in England Dunelt. The hub date stamped 68, so the bike is likely from 1968 or 69.

How To Adjust Cable/Shifting On Sturmey Archer 3 Speed Hub

I show how to attach the cable and adjust the shifting with a Sturmey Archer 3 speed hub and shifter. This is my 1970 (made in England) Raleigh Tourist. I overhauled the 3 speed hub and needed to set up the shifting again. I demonstrate the whole process.

How To Overhaul/Clean/Lube Sturmey-Archer 3 Speed Hub – AW type

I disassemble, clean, degrease, replace bearings, lubricate and re-assemble a 3 speed Sturmey Archer AW type bike hub. A basic teardown/rebuild. This hub is date stamped 74 (1974). Sturmey Archer hubs vary over time, but the basic procedures are the same. These made in England hubs are really cool. These hubs are often found on …Read more »

Overhauling 60 Year Old Sturmey Archer 3 Speed Hub

I overhaul the Sturmey Archer hub from my 1954 Indian Scout bike. The hub is an AW model and has the 54 date code on it.