Cables

Latest
Most Viewed
Most Commented
How To Install Inline Cable Barrel Adjusters

I show how to install an inline barrel cable adjuster. The adjuster I am using is made by Origin8, but there are similar types adjust made by other companies such as Jagwire, Shimano and SRAM. I install the adjust to fine tune the shift cable on my front derailleur. This is part of my DIY …Read more »

How to Replace Internal Routed Cables

I show how to feed new brake/shifter cable housings through bike frame tubes. I show two methods. The first method is where a cable housing is already routed through the frame. The second method is where there isn’t already a cable through the frame. This will allow you to install brand new cable housings on …Read more »

Replacing Shifters/Brake Levers/Cables/Housings On Trek 4300 Mountain Bike

I show the process of removing the old trigger shifters/brake levers and installing brand new shifters/brake levers along with new shift cables/brake cables and housings. The bike is a Trek 4300 mountain bike.

Installing Reproduction Cannondale Top Tube Cable Guides

I needed to replace the plastic cable guides on the top tube on a Cannondale bike. One was broken and the other two were gone. Original stock cable guides (part # A113) are hard if not impossible to find. But there are replacement guides available online that are made with 3D printers. I bought these …Read more »

How To Replace Shift Cable In Suntour X-Press Accushift Shifter

I show how to replace the shift cables in Suntour X-Press Accushift Plus Shifters. First you have to open them up. And then the cable is non-standard, and is not readily available. I used a compatible type cable. These cables are similar to what I used in the video: http://www.amazon.com/exec/obidos/ASIN/B002NL8YCU/ref=nosim/rjthebikeguy-20