Removing Stuck/Frozen Seatpost By Cutting With Sawzall
I tried removing the seized seatpost with lots of Kano Kroil penetrating oil, a 4 ton winch, Snap-On PH3050B air hammer, dry ice, heat gun, alternating heat/cold, a small sledge hammer, and a big pipe wrench. I seriously beat on it! It didn’t move at all. I finally resorted to cutting it out. I used …Read more »
How To Make A Star Nut Setter Tool For Threadless Fork Easy! Cheap!
I show how to make a cheap and easy homemade DIY star fangled nut setter tool to drive a star nut into the steerer tube of threadless forks. Actually, I build two different versions, and use one to install a star fangled nut. This will a allow you install a starnut without an expensive special …Read more »
How To Remove A Star Fangled Nut From A Fork Steerer Tube
I show how to remove a star nut aka star fangled nut from a fork steerer. The main reason why this might be done is if you plan to cut a steerer tube shorter and there is already a starnut installed. Even then the star fangled nut might not need to be completely removed. How …Read more »
Removing A Seized Seatpost with Coke/Coca-Cola – Does It Work?
I have read and been told that Coca-Cola will work to free a stuck/frozen seatpost. One person even said that after putting Coke in the seat tube for a couple days, the seatpost would slide right out. So I decided to test the Coke method of seatpost removal. I left the frame with Coke in …Read more »
How To Convert To Disc Brakes From V-Brakes On Mountain Bike
I show how to upgrade an old mountain bike from V-brakes to disc brakes. I replace the wheels, install rotors, calipers, new cables/housings, and adjust everything. The disc brakes I used are Avid BB5’s. I used 160mm rotors. They are mechanical disc brakes, so are cable actuated. The Avid CPS mounting brackets I used were …Read more »