Threaded To Threadless Headset/Fork Upgrade On Vintage Road Bike
I convert my 1990 Trek 1000 from a 1 inch threaded fork/headset to a threadless setup with a carbon fiber composite fork. The most common threaded forks have 1 inch steerer tubes. So you are limited when converting them to threadless to use a threadless fork with a 1″ steerer. A fork with a 1-1/8″ …Read more »
Straighten/Align Bent Derailleur Hanger Without Special Tool
I show how to fix a bent derailleur hanger without expensive tools like Park Tool’s DAG-2 Derailleur Hanger Alignment Gauge. This repair is meant for steel frames with integrated hangers. If you have a replaceable hanger, I recommend you just replace it. Do not attempt to straighten the hanger using the derailleur. You will likely …Read more »
Convert Mountain Bike To Disc Brakes With No Frame/Fork Mounts
I show how to convert an old vintage MTB with no frame/fork disc brake mounts, to disc brakes using adapters. I show various disc brake mounting adapters and how they can be used to install disc brakes. Some of the adapters I show are A2Z DM-UNI, Chaser Tech Bicycle Rear Disc Brake Adapter Kit, and …Read more »
Removing Stuck/Frozen Seatpost By Cutting With Sawzall
I tried removing the seized seatpost with lots of Kano Kroil penetrating oil, a 4 ton winch, Snap-On PH3050B air hammer, dry ice, heat gun, alternating heat/cold, a small sledge hammer, and a big pipe wrench. I seriously beat on it! It didn’t move at all. I finally resorted to cutting it out. I used …Read more »
7 Speed To 10 Speed Drive Train Upgrade – DIY Cyclocross/Gravel Bike Project
I show the process of upgrading my homebrew cyclocross bike from a 7 speed drive train, up to a 10 speed drive train. I replaced the cassette, rear derailleur, chain, and shifters along with new cables. Build Cheap DIY Cyclocross Bike From Hybrid: