How To Make DIY Dropout Alignment Gauge Tools
I show how to make and use homemade tools to check and straighten bent dropouts on a bike frame. Only use these types of tools to straighten the dropouts on a steel or cro-moly frame. Do not attempt to bend the dropouts on an aluminum, carbon fiber or any type of frame other than steel …Read more »
How To Make Adjuster Cap Tool For SR Suntour Forks
I show how to make a tool to remove the adjuster cap from SR Suntour forks. There appear to be at least a couple sizes of adjuster caps. My homemade tool is for the small size adjuster cap. The shocks in the video are SR Suntour T890 forks.
How To Check Cassette/Freewheel Wear With Rohloff HG Check Tool
I show how to check for a worn freewheel or cassette using a Rohloff HG/IG Sprocket Wear Indicator. This tool is designed for Shimano HG freewheels and cassettes but may work on other brands as well. Rohloff HG/IG Sprocket Wear Indicator at Amazon: http://www.amazon.com/exec/obidos/ASIN/B001GSKIJ/ref=nosim/rjthebikeguy-20
How To Make Adjuster Cap Tool For RST Forks – Socket Version
I show how to make a tool to remove the adjuster cap from RST forks. I make the tool from a 15/16″ socket using a Dremel tool and some grinder bits. This tool will allow me to do an overhaul of these shocks. In a previous video, I made an adjuster cap tool using a …Read more »
How To Make Adjuster Cap Wrench For RST Forks
RST Adjuster Cap tools are hard to find. I haven’t found a plae where I can buy one. So I decided the make my own homemade wrench to remove the adjuster cap. I just bought a cheap 1 inch combination wrench at a junk shop and used a Dremel tool. After this video, I made …Read more »